We can offer you reliably all services concerning Type Approval in United Kingdom (London). Our distinguished contact with the authority in United Kingdom (London), 信頼関係 Office of Communications (OFCOM), as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in United Kingdom trouble-free and cost-effective.
We will assist you to put your product successfully on the market by offering the following services:
Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
Provide pre-compliance testing during the design and development phase to determine compliance
Assist in completion of applications and other required forms
Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
Handle entire submittal process including working with local testing and certification organizations
Arrange for initial factory inspections that are required before certification issuance
Coordinate verification testing on qualified products as needed
Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
Support renewal maintenance of certificates as needed
User manual translation service when needed
For United Kingdom we can offer you a short termed tentative offer based upon a submitted Datasheet of the device: email@example.com
On 24 August 2021, the British Information Commissioner’s Office published the following news on its website
“Businesses are encouraged to be ready for full implementation of the new UK regime as soon as possible.
However, to allow businesses time to adjust, CE marked goods in scope of this guidance that meet EU requirements (where these match UK requirements) can continue to be placed on the GB market until 1 January 2023 where EU and UK requirements remain the same. This includes goods which have been assessed by an EU recognised notified body.
The UKCA mark must be used for placing goods on the GB market from 1 January 2023.”
Ofcom consults on a new regulation for short range radar devices
Today, the UK's communications regulator published proposals to amend the regulations concerning the use of short-range radar equipment for vehicular use. (For example: blind spot radars, collision radars and other driving assistance equipment)
The mentioned amendments refer to the Wireless Telegraphy (Automotive Short-Range radar) Regulations 2013.
These regulations indicate that certain SRRs in vehicles can be used in the 24 GHz band without the necessity of a spectrum license. They are proposing a minor amendment so the license exemptions continue to apply in the UK after the end of the transition period in the Withdrawal Agreement between the UK and the European Union on 31th December 2020.
Responses to this consultation are welcome by 14th of December 2020
The Brexit is finally there and the impact on any manufacturer intending to sell products on the UK markets is starting to cast its shadows ahead.
Starting with January, 1st 2021 new rules apply for the conformity assessment of radio products placed on the market in England, Wales and Scotland. Any product covered by legislation requiring the UKCA mark, requiring a mandatory third-party assessment or conformity assessment being carried out by a UK Notified Body in the past will need to use the new UKCA mark. Fortunately, products already in stock are exempted from this regulations and may be sold showing the CE mark only.
The technical examination certificate issued in the past by a UK Notified Body will cease its validity by January 1st 2021. This not only affects the conformity of your products with the regulations in the UK but also with the Radio Equipment Directive. All of those “old” TEC’s must be transferred to a conformity assessment body recognized by the UK government AND to a Notified Body located in the European Union.
An authorized representative located within the European Union will no longer be recognized by Great Britain after January 1st 2021 as well and you will have to choose an authorized representative or responsible person in the UK. The product marking must show the company details, including name and contact address, for this responsible as well.
And finally, the declaration of conformity must be changed to declare conformance to the UK technical standards once those are implemented.
IB-Lenhardt AG is fully supporting you during and after this transition phase with all necessary services to ensure the ongoing conformance of your products with the applicable rules. With our strong network of cooperation partners we will support the transfer of your Technical Examination Certificates to either an assessment body in the UK, a Notified Body in the EU or both.
The Type G electrical plug has three rectangular blades in a triangular pattern and has an incorporated fuse (usually a 3 amps fuse for smaller appliances such as a computer and a 13 amps one for heavy duty appliances such as heaters). British sockets have shutters on the live and neutral contacts so that foreign objects can’t be introduced into them.
Alternate Country Names
Type Approval Expert United Kingdom お問合わせください。