世界中のホモロゲーション
型式認証のエキスパート

Regulatory News dated Q1/2021

  • ChinaPublic solicitation for comments on wireless charging.

    The Chinese Ministry of Industry and Information Technology (MIIT) calls for public comments on "Interim Provisions on Radio Management of Wireless Charging (Power Transmission) Equipment (Draft for Solicitation of Comments)".

    The draft concerns the following equipment types:

    1. Mobile and portable wireless charging equipment using 100-148.5 kHz, 6765-6795 kHz, 13553-13567 kHz
    2. Wireless charging equipment for vehicles (including motorcycles) with operating frequencies 19-21 kHz, 79-90 kHz

    The consultation is open for comments till 20 March 2021.

    Comments can be provided in Chinese to:

    Contact: Radio Administration of the Ministry of Industry and Information Technology

    Contact number: 010-68206220 (fax)

    Email: xhhz@miit.gov.cn

    Link to the draft regulation

    Source (Chinese)


  • EU (RE-D)Transition period for ETSI EN 300 328 V2.2.2 specification

    With reference to the official Journal of the European Union from 6 February 2020, we would like to remind you that the transition period of the harmonised standard EN 300 328 V2.2.2 expires on 6 August 2021. EN 300 328 regulates the specifications for data transmission equipment operating in the 2.4 GHz band.

    V.2.1.1, the latest version of EN 300 328, is going to expire on 6 August, 2021.

    After the end of the transition period, devices introduced onto the market, as well as those which have been tested according to V2.2.1 must be compliant with the new requirements of V2.2.2.

    The most important change from the newly published EN 300 328 V2.2.2 to V2.1.1 is the revision of rules and measurement for receiver blocking, so re-tests will become mandatory for all devices.

    Source: Official Journal of the European Union


  • MexicoIFT issues the new regulation 291013-DOF

    On 25 February 2021, the new regulation 291013-DOF-Diario Oficial de la Federación published by the Mexican Authority Instituto Federal de Telecomunicaciones (IFT) comes into force.

    291013-DOF-Diario Oficial de la Federación is only addressed to approvals which were pursued by local testing.

    To show compliance, the devices have to be re-tested and re-approved with the real importer acting as certificate holder. Certificates will have an unlimited validity but may be called for market surveillance.

    The regulation applies to devices subject to the following standards:

    • NOM-196-SCFI-2016 (IFT-004-2014)
    • NOM-208-SCFI-2016 (IFT-008-2015)
    • NOM-218-SCFI-2017 (IFT-005-2016)
    • NOM-221/2-SCFI-2018 (IFT-011-2017)

    Source: official link


  • QatarCRA launches Public Consultation on Class License for SRD

    To cope with recent technology developments, Communications Regulatory Authority wish to update the Version 3 of Class License for Short Range Devices

    The current developments in technology require a revision of the current Version No. 3 of Class License for Short Range Devices. This document specifies the harmonized standards to be used for SRDs. The new Version No. 4 is intended to cover additional applications of radio-communication devices.

    The document can be seen here.

    All interest groups are kindly invited to address their comments and opinion to CRA by email until latest 11 March 2021.


  • Algeria77 GHz band opened now

    On 2020-01-20, the Algerian Republic published the JOURNAL OFFICIEL DE LA REPUBLIQUE ALGERIENNE N°05

    New list of Characteristics of short-range devices used in the establishment of private internal radio networks have been published.

    The maximum allowed Output Power / maximum magnetic field level has been defined for several frequency bands from 9 KHz – 246 GHz considering different applications like inductive, RFID, medical, general ISM applications and Radars.

    Now the 77 GHz Band with limitation of 1W maximum output power is possible.

    Dowloadlink "Journal Officiel"


  • AzerbaijanEMC Certification Body accredited by AZAK

    According to Resolution No 175 of the Cabinet of Ministers of the Republic of Azerbaijan dated August 21, 1998, all types of telecommunications equipment and devices (both as a complete set and as a communication module) imported to the territory of the Republic, sold for sale and operation, must be certified in accordance with the requirements of the interconnected telecommunications network. It is the manufacturer’s duty to ensure that the technical level and quality indicators of products, as well as electromagnetic compatibility, meet the standards throughout the country.

    In accordance with the amendment No. 608-VQD dated April 14, 2017 made to the Law of the Republic of Azerbaijan , certificates of conformity are issued by accredited bodies. Since there was no EMC compliance assessment body before December 2020, EMC standards were also reflected in AZS certificates by AZS certification bodies. However, on 02 December 2020, a certification body was empowered by the Azerbaijan Accreditation center (AZAK) to conduct certification for compliance with EMC standards and reflect the relevant EMC standards in these certificates.

    If you have any questions, please feel free to contact your designated IB-Lenhardt AG contact.

    Official link to Resolution No 175: http://e-qanun.gov.az/framework/3410

    Official link to Amendment No. 608-VQD: http://e-qanun.gov.az/framework/35761


  • GeneralIBL-Lab GmbH accreditation: FCC Recognition

    This part concludes our series about our test laboratory’s FCC (U.S. Federal Communications Commission) acccreditation (see FCC Accredited Labs - FCC Testing Laboratories (fcclabs.org)).

    We are happy to announce that in January 2021, the accreditation was finalized by the FCC-recognized accreditation body in Germany, BNetzA (Bundesnetzagentur) under FCC Registration Number 560171.

    Tests in our FCC-accredited lab include conformity measurements according to regulatory requirements in the U.S. as summarized in IBL-Lab’s DAkkS certificate annex D-PL-21375-01-03e (dakks.de, PDF): Electromagnetic Compatibility and Telecommunication.

    Together with the recent recognition by the FCC, the laboratories of IBL-Lab GmbH have a comprehensive portfolio of testing services with accredited test and laboratory facilities. These services, together with the certification services of KL-Certification GmbH, support the worldwide approvals of radio products initiated by IB-Lenhardt AG on behalf of their customers.

    Use the transparent overview of your projects online with our unique Type Approval Management System TAMSys®, developed 100% in-house. Benefit from the noticeable acceleration of the international market access of your products through the time and content-coordinated service package of the IB-Lenhardt Group—now including accredited testing, type approval and certification services.


  • CanadaISED Supplementary Procedure to Radio Standards Specification

    The Department of Innovation, Science and Economic Development Canada opens a public consultation on the newly drafted RSS-102 SPR-004 “Time-Averaged Specific Absorption Rate (TAS) Assessment Procedures for Wireless Devices Operating in the 4 MHz – 6 GHz Frequency Band”. The SPR, supplementary procedure to radio standards, defines the general test methods for the RF Exposure compliance assessment for wireless devices operating in the frequency range 4 MHz to 6 GHz based on time averaging methods.

    The consultation is open until February 23rd, 2021 using the link as below.

    Downloadlink


  • GeneralIBL-Lab GmbH accreditation: Electromagnetic Compatibility

    Today, we would like to provide you an insight into the establishment and work of our accredited EMC laboratory.

    Thanks to the high level of technical competence and organizational skills of its employees and all those involved, IBL-Lab GmbH was able to build up the EMC area at a remarkable pace, and completed this with the successful DIN EN ISO/IEC 17025:2018 DAkkS accreditation in December 2020.

    "Electromagnetic Compatibility (EMC)" refers to the capability of a technical device not to disturb other devices (with unintentional electric or electromagnetic effects) as well as not being disturbed by other devices.

    The demands on the electromagnetic compatibility of devices and systems with integrated radio technology is regulated by law in the EU and many other countries and – depending on country and purpose – confined by different limits for interference immunity or for the emitted interference of the device or system.

    Tests in the accredited EMC Laboratory of IBL-Lab GmbH include (among others) conformity measurements according to the following regulatory requirements:

    • EMC Directive (EMCD 2014/30/EU)
    • FCC Tests for the USA according to Part 15 and Part 18
    • Tests for Canada according to ISED Requirements

    Since January 2021, the FCC lists IBL-Lab GmbH as accredited test firm. We will get into more detail on this in our last part of this series soon.


  • GeneralIBL-Lab GmbH accreditation: Radio

    In the second part of our laboratory series, we would like to introduce you to the accredited radio laboratory of IBL-Lab GmbH, which was set up at our St. Ingbert site in the period from April to May 2020 and now supports the type approval projects of IB-Lenhardt AG and the NB (Europe), TCB (USA), RCB (Japan), FCB (Canada) projects of KL-Certification GmbH after successful DAkkS accreditation in accordance with DIN EN ISO/IEC 17025:2018 in December 2020.

    The increasing use of the radio spectrum by devices and systems with integrated radio technologies requires strict compliance with legal and normative requirements for radio products depending on the intended use.

    The proof of conformity of your product in our accredited laboratory provides you with the security to confirm the compliance of your product transparently and effectively to your customers.

    Of course, this also has a pioneering positive effect on international approvals.

    Thus, the tests of the accredited radio laboratory of IBL-Lab GmbH include conformity measurements according to the following regulatory requirements:

    • Radio Equipment Directive RED 2014/53/EU for countries of the European Union
    • FCC compliance testing for the USA
    • ISED compliance testing for Canada
    • Compliance testing for Japan according to Radio Law and Telecommuincation Business Law

    Next week we will give you an insight into the portfolio of our accredited EMC laboratory.


  • EgyptNTRA issued updated SRD Guidelines

    In December 2020, the National Telecom Regulatory Authority (NTRA) issued the Short-range Devices (SRD) Radio Spectrum Guidelines. The guidelines specify rules for the usage of SRD in Egypt while also defining the technical parameters.

    This document came into force immediately.

    Source: Radio Spectrum Guidelines


  • BhutanNew Rules and Regulation

    The Bhutan InfoComm and Media Authority (BICMA) has recently published the revised Rules and Regulations (NRRR-2021) which came into effect on 1st January 2021.

    The National Radio Rules 2011 shall therefore be repealed by the above Rules and Regulations.

    BICMA has also released its National Radio Frequency Allocation Plan 2021 (NRFAP-2021)

    Downloadlink for NRRR-2021

    Downloadlink for NRFAP-2021


  • GeneralIBL-Lab GmbH accreditation: Electrical Safety

    We are pleased to announce that IBL-Lab GmbH, a subsidiary of IB-Lenhardt AG, after successful DAkkS accreditation according to DIN EN ISO/IEC 17025:2018, can demonstrate compliance with the requirements of the EU and beyond for approvals in the USA, Canada and Japan, in all relevant areas:

    • Electrical Safety
    • Radio Equipment Directive RED 2014/53/EU for EU countries.
    • EMC Directive (EMCD 2014/30/EU) for EU countries
    • FCC tests for the USA
    • ISED tests for Canada (recognition as CAB Canada by DAkkS coming soon)
    • Examinations for Japan according to Radio Law and Telecommunication Business Law

    After the foundation of IBL-Lab GmbH in 2018, the first step was the DAkkS accreditation according to DIN EN ISO/IEC 17025 in the field of safety in 2019, the starting signal for our own safety tests for our customers.

    Thanks to the new safety standards IEC 62368-1 and EN 62368-1, which move away from technology-focused catalogues to a hazard-based approach, it is now easier to equally assess varying products.

    For instance, hazards are categorized by type and “size“ of the according energy source:

    • electrical
    • mechanical
    • power
    • radiation
    • thermal

    In the next part of this series, we will take a closer look at our accredited radio laboratory. Stay tuned!

    https://www.dakks.de/as/ast/d/D-PL-21375-01-01.pdf


  • BrazilANATEL publishes new Act 77

    The Brazilian authority ANATEL published the new Act 77 on 5th January, 2021, which will come into force on 4th July, 2021. This act is applicable to all terminal devices with connection to internet and telecommunications network infrastructure equipment. From then on, the applicant will have to provide a declaration letter to the authority, which contains the following information:

    1. Indicating that the product was developed in compliance with the principle of security by design;
    2. relating to which requirements of this document the equipment and its supplier meet at that moment; and
    3. recognizing that they are aware that cybersecurity requirements are subject to updates, including regulatory and administrative ones, in line with technological development, with the emergence of new threats or vulnerabilities.

    Downloadlink Act n° 77 (English version)


  • MoldovaNew marking regulation

    According to the new regulation TR34/2019, which will come into force on February 22nd, 2021, the application of both CE and SM mark on the same product is not permitted anymore.

    The manufacturers can decide to apply either the SM mark or the CE mark only on their products. Please note that there is no transitional period specified in the regulation. The authority recommends that all manufacturers, who already have received Moldavian certificates, start to remove the SM mark if the radio equipment is already labelled with the CE mark.

    All products that are labelled with CE or SM mark should be accepted to be placed on the market of the Republic of Moldova
    (see page 3 of the Government Degree TR34/2019).


  • EU (other directives)Commission asks for public consultation over the EMC Directive

    The European Commission asks for a public consulation regarding the effectiveness, efficiency, relevance, coherence and EU added value of the Electromagnetic Compatibility Directive.
    The target of the consultation is to gain evidence and information for the following points:
    • identify possible difficulties during the implementation that may require regulatory or/and non-regulatory corrective measures
    • examine the adequacy of the Directive’s provisions in light of scientific and technological progress
    The Questionnaire is available in multiple languages and can be submitted until 29th January 2021.


  • Sierra LeoneNATCOM publishes updated Type Approval Regulations

    The authority NATCOM published new Type Approval regulations in November 2020 after starting the reviewing process in 2019.

    Type approval is required for all electronic communication equipment. Type approval can be obtained with the typical technical documentation and test reports from accredited test labs.

    Also, the obligations and duties of importers and distributors are layed out.

    The full regulations can be found here: Downloadlink


  • RussiaFAC hands over activities to the new Ministry

    In November 2020, Decree No 719 was published by the Russian government with the intention to enhance governance in the field of digital development, communications and mass communications.

    All the activities which were carried out by the Federal Agency of Communications (FAC) now lie within the responsibility of the Ministry of Digital Development, Communications and Mass Media of the Russian Federation.

    According to the announcement, there will be a 6-month transition period and the ongoing projects in progress by FAC will be switched to the Ministry of Digital Development, Communications and Mass Media of the Russian Federation.

    Currently, no delays have been announced.

    Source in Russian


  • Hong KongOCFA published a new Table of Frequency Allocations

    In January 2021, Hong Kong's Office of the Communications Authority (OFCA) published a new Table of Frequency Allocations which replaces the version from April 2020.

    The plan complies with the Region 3 allocations under the Radio Regulations which are applicable to Hong Kong, the allocations which have been adopted by Hong Kong, as well as the band plans in use in Hong Kong.

    The detailed changes which emerge from this regulation can be found on the OFCA website:


  • United Arab EmiratesTRA UAE released new Regulation for UWB and SRD

    The Telecommunications and Regulatory Authority TRA in United Arab Emirates have released a new version for Ultra Wide Band and Short Range Devices regulation

    The TRA revised the regulation to current version 4.0. The regulation was released 21 December 2020 and is in force.

    The document defines the requirements for compliance, that UWB and SRD products need to fulfill.

    Within the regulation release, it shows the allowed frequencies together with information about usage of product, transmission power, duty cycle, channel spacing and the standard reference.

    Our clients are kindly invited to check whether their equipment (still) fulfills these requirements.

    Link to the regulation


  • ArgentinaTowards WiFi 6E in Argentina

    Argentina paves the way towards the allocation of the Wifi 6E band as a public consultation has been launched.
    Comments and proposals can still be submitted within this month.
    Approvals in the band 5925 – 6425 MHz are still not allowed but might be in the near future.
    Source: official link


All News on one long and searchable page
This website only uses the most necessary cookies to enhance your browsing experience. Please accept the use of cookies on this site, to allow us improving the site for you. You will find more information about cookies in the Privacy Statement