世界中のホモロゲーション
型式認証のエキスパート

Environment Testing

Environment Testing

For the worldwide or national approval of a product, various environmental aspects must be taken into account within the framework of quality assurance and further development. IBL-Lab GmbH therefore offers you the opportunity to carry out environmental simulation tests for small appliances.

First and foremost is the proven IEC 60068 series, which has been the cornerstone of product validation in the environmental field for many years. With over 60 publications on a wide range of topics, it is also one of the most comprehensive that the IEC has to offer.

During the life cycle of a product, from production to transport, storage and use, it is exposed to a wide range of climatic conditions, depending on the area of application. The hardest aspects here include transport or use in vehicles (automotive). Here the fluctuations within the parameter group can be among the highest, be it temperature, humidity or vibration.

Climatic tests:

IEC/DIN EN 60068-2-1: Cold
IEC/DIN EN 60068-2-2: Dry heat
IEC/DIN EN 60068-2-14: Temperature change
IEC/DIN EN 60068-2-30: Humid heat, cyclical
IEC/DIN EN 60068-2-78: Humid heat, static

Vibration/Oscillation and mechanical shock:

IEC/DIN EN 60068-2-6: Oscillation (sinusoidal)
IEC/DIN EN 60068-2-27: Mechanical shock
IEC/DIN EN 60068-2-64: Oscillation, boradband noise

•  ISO 16750 Road vehicles – Environmental conditions and electrical testing for electrical and electronic equipment
•   ISO 12405-1 Electrically propelled road vehicles – Test specification for lithium-ion traction battery packs and systems
•   UN Manual of Tests and Criteria: UN 38.3
•   IEC 62281 Safety of primary and secondary lithium cells and batteries during transport.
•   IEC 62133 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary lithium cells, and for batteries made from them, for use in portable applications - Part 1 & 2: Nickel & Lithium systems

•   MIL-STD-810H - Environmental Engineering Considerations and Laboratory Tests
•   DO-160E - Environmental Conditions and Test Procedures for Airborne Equipment
•   ETSI EN 300 019 - Equipment Engineering (EE)
•   JDQ 201 - Testing of Electronic and Electrical Devices — Environmental and Mechanical Loads
•   JDQ 53.3 - Environmental Design & Testing of Electronic/Electrical Components and Assemblies
ETSI EN 300 019-1-4 V1.1.2 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-4: Classification of environmental conditions Stationary use at non-weatherprotected locations
ETSI EN 300 019-2-3 V2.1.2 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-3: Specification of environmental tests; Stationary use at weatherprotected locations
ETSI EN 300 019-2-4 V2.1.2 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations
IEC 61969-3 Mechanical structures for electrical and electronic equipment – Outdoor enclosures – Part 3: Environmental requirements, tests and safety aspects
IEC-60068-2-1 Environmental testing – Part 2-1: Tests - Test A: Cold
IEC-60068-2-11 Basic environmental testing procedures – Part 2-11: Tests – Test Ka: Salt mist
IEC-60068-2-14 Environmental testing – Part 2-14: Tests – Test N: Change of temperature
IEC-60068-2-18 Environmental testing – Part 2: Tests- Test Rand guidance: Water
IEC-60068-2-2 Environmental testing – Part 2-2: Tests – Test B: Dry heat
IEC-60068-2-27 Environmental testing – Part 2-27: Tests – Test Ea and guidance: Shock
IEC-60068-2-29 Basic environmental testing procedures – Part 2: Tests - Test Eb and guidance: Bump
IEC-60068-2-30 Environmental testing – Part 2-30: Tests – Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC-60068-2-31 Environmental testing – Part 2-31: Tests – Test Ec: Rough handling shocks, primarily for equipment-type specimens
IEC-60068-2-40 Basic environmental testing procedures – Part 2-40: Tests – Test Z/AM: Combined cold/low air pressure tests
IEC-60068-2-41 Basic environmental testing procedures – Part 2-41: Tests – Test Z/BM: Combined dry heat/low air pressure tests
IEC-60068-2-52 Environmental testing – Part 2-52: Tests – Test Kb: Salt mist, cyclic (sodium chloride solution)
IEC-60068-2-6 Environmental testing – Part 2-6: Tests – Test Fc: Vibration (sinusoidal)
IEC-60068-2-64 Environmental testing – Part 2-64: Tests – Test Fh: Vibration, broadband random and guidance
IEC-60068-2-68 Environmental testing – Part 2: Tests – Test L: Dust and Sand
IEC-60068-2-74 Environmental testing – Part 2: Tests – Test Xc: Fluid contamination
IEC-60068-2-78 Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, steady state
John Deere Standard JDQ 201 Testing of Electronic and Electrical Devices — Environmental and Mechanical Loads
John Deere Standard JDQ 53.3 Environmental Design & Testing of Electronic/Electrical Components and Assemblies
MIL-STD-810H Environmental Engineering Considerations and Laboratory Tests
RTCA / DO-160E Environmental Conditions and Test Procedures for Airborne Equipment
This website only uses the most necessary cookies to enhance your browsing experience. Please accept the use of cookies on this site, to allow us improving the site for you. You will find more information about cookies in the Privacy Statement