Radio Type Approval, Homologation, Certification Services - Global Market Access Solutions
We can offer you reliably all services concerning Type Approval in Senegal (Dakar). Our distinguished contact with the authority in Senegal (Dakar), our good relationship to Autorité de Régulation des Télécommunications et des Postes (ARTP), as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in Senegal trouble-free and cost-effective.
We will assist you to put your product successfully on the market by offering the following services:
Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
Provide pre-compliance testing during the design and development phase to determine compliance
Assist in completion of applications and other required forms
Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
Handle entire submittal process including working with local testing and certification organizations
Arrange for initial factory inspections that are required before certification issuance
Coordinate verification testing on qualified products as needed
Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
Support renewal maintenance of certificates as needed
User manual translation service when needed
For Senegal we can offer you a short termed tentative offer based upon a submitted Datasheet of the device: quote@ib-lenhardt.de
GEO / MAP of Senegal
General information about Senegal
Formal Name
Senegal
Capital
Dakar
Continent
Africa
Degree of latitude
14.190083171658282
Degree of longitude
-15.155373387597603
Currency
CFA Franc BCEAO
Country code
+ 252
Top-level domain
.sn
Languages
French (official); Wolof, Serer, other ethnic dialects
Marking of Certification Logo or Number Required?
Yes
Size
mm
Specific User Manual Requirements?
No
News for Senegal
New Type Approval Regulation
On August, 27th. the Telecommunication Authority ARTP in Senegal has issued updated type approval regulations, replacing décision No 2004-002/ART/DG/DRC/D.Rég. The main changes are as follows:
the certificate validity will be changed from unlimited to 5 years
local testing will become mandatory
a label will be implemented
Even though the new regulation has already been published, it is not fully implemented yet. IB-Lenhardt will keep you updated on when the changes take effect.
Description
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
Netzspannung
230V
Netzfrequenz
50Hz
Description
The Type D electrical plug has three large round pins in a triangular pattern. Type M plugs are often used alongside Type D plugs for larger appliances and as a result, some sockets work with both Type D and Type M plugs. Type D plugs are rated 5 amps.
Netzspannung
230V
Netzfrequenz
50Hz
Description
The Type E electrical plug has two 4.8 mm round pins spaced 19 mm apart and a hole for the socket’s male grounding pin. The Type E socket is different to the Type F socket which is standard in other continental European countries, such as Germany. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type E plugs are rated 16 amps.
Netzspannung
230V
Netzfrequenz
50Hz
Description
The Type K plug has two round pins as well as a grounding pin. It is similar to Type F, the difference being that Type F has grounding clips instead of a grounding pin. Type C plugs are perfectly compatible with Type F sockets. Type E plugs and sockets are also used in Denmark.
This website only uses the most necessary cookies to enhance your browsing experience. Please accept the use of cookies on this site, to allow us improving the site for you. You will find more information about cookies in the Privacy Statement
Your personal contact: