Radio Type Approval, Homologation, Certification Services - Global Market Access Solutions
We can offer you reliably all services concerning Type Approval in Pakistan (Islamabad). Our distinguished contact with the authority in Pakistan (Islamabad), our good relationship to Pakistan Telecommunication Authority, as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in Pakistan trouble-free and cost-effective.
We will assist you to put your product successfully on the market by offering the following services:
Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
Provide pre-compliance testing during the design and development phase to determine compliance
Assist in completion of applications and other required forms
Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
Handle entire submittal process including working with local testing and certification organizations
Arrange for initial factory inspections that are required before certification issuance
Coordinate verification testing on qualified products as needed
Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
Support renewal maintenance of certificates as needed
User manual translation service when needed
For Pakistan we can offer you a short termed tentative offer based upon a submitted Datasheet of the device: email@example.com
GEO / MAP of Pakistan
General information about Pakistan
Degree of latitude
Degree of longitude
Punjabi 48%, Sindhi 12%, Siraiki (a Punjabi variant) 10%, Pashtu 8%, Urdu (official) 8%, Balochi 3%, Hindko 2%, Brahui 1%, English, Burushaski, and others
Marking of Certification Logo or Number Required?
Specific User Manual Requirements?
News for Pakistan
PTA issued revised Type Approval Regulations
The Pakistan Telecommunication Authority PTA issued its revised regulations on December 31, 2019. The type approval process was not noteably changed, but:
1. the sample return value limit was lowered from 3000 USD to 2000 USD.
2 The local system testing part is now officially included in this regulation. In regard of this system based testing, applicants may be asked to provide device samples. Clause 5.1.m of Section 2 of the revised regulation reads as follows: "As part of type approval evaluation, PTA will perform system based checking e.g. operation system, firmware, output power, programmed frequencies as and when required. PTA may also ask to provide demo of the device to show all the features programmed in the devices and compare the same with submitted test report. This demo may be asked in person or through video conferencing as deemed appropriate."
New regulation and application form available online
The Type Approval Technical Standards Regulations released on 2017-12-31 by the PTA (Pakistan Communication Authority) is now available online, as well as the new form for a "Certificate of Compliance to technical standards".
Addition to List of Devices Exempt from Type Approval
Pakistan’s Telecommunication Authority (PTA) has extended its list of devices which are exempt from Type Approval in Pakistan, adding Wi-Fi Access Points Operating in ISM Band (2.4-2.5 GHz, 5725-5.875 GHz) and conforming to PTA ISM Band Regulation SRO 287(I)/2016. This list was published May 26, 2017 as follows:
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
The Type D electrical plug has three large round pins in a triangular pattern. Type M plugs are often used alongside Type D plugs for larger appliances and as a result, some sockets work with both Type D and Type M plugs. Type D plugs are rated 5 amps.
The Type G electrical plug has three rectangular blades in a triangular pattern and has an incorporated fuse (usually a 3 amps fuse for smaller appliances such as a computer and a 13 amps one for heavy duty appliances such as heaters). British sockets have shutters on the live and neutral contacts so that foreign objects can’t be introduced into them.
The Type M plug has three round pins in a triangular pattern and looks similar to the Indian Type D plug, but its pins are much larger. Type M plugs are sometimes used for bigger appliances in countries that make use of Type D plugs, as well as in Israel (Type H). Therefore, sockets in these countries sometimes work with Type M plugs.