Radio Type Approval, Homologation, Certification Services - Global Market Access Solutions
We can offer you reliably all services concerning Type Approval in Maldives (Male). Our distinguished contact with the authority in Maldives (Male), our good relationship to Communications Authority of Maldives, as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in Maldives trouble-free and cost-effective.
We will assist you to put your product successfully on the market by offering the following services:
- Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
- Provide pre-compliance testing during the design and development phase to determine compliance
- Assist in completion of applications and other required forms
- Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
- Handle entire submittal process including working with local testing and certification organizations
- Arrange for initial factory inspections that are required before certification issuance
- Coordinate verification testing on qualified products as needed
- Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
- Support renewal maintenance of certificates as needed
- User manual translation service when needed
For Maldives we can offer you a short termed tentative offer based upon a submitted Datasheet of the device:
GEO / MAP of Maldives
General information about Maldives
Degree of latitude
Degree of longitude
Dhivehi (official); Arabic, Hindi, and English are also spoken
Size (in km²)
Population (as of 2011)
Country code according to ISO 3166-2
Country code according to ISO 3166-3
Certificate Example for Maldives
Authority / Regulatory Body
Communications Authority of Maldives
Validity Period of Certification
In-Country Testing Required?
Average lead time for radio type approval
(24GHz, 77GHz, 79GHz, UWB)
(315MHz, 433MHz, 868MHz)
(125kHz, 315MHz, 433MHz, 868MHz)
(Tank Level, Positions-Radar)
(315MHz, 433MHz, 868MHz)
(125kHz, 13,56MHz, 868MHz)
(24GHz, 60GHz, 79GHz)
Safety Information for Maldives
The Type A electrical plug (or flat blade attachment plug) is an ungrounded plug with two flat parallel pins. Although the American and Japanese plugs appear identical, the neutral pin on the American plug is wider than the live pin, whereas on the Japanese plug both pins are the same size. As a result, Japanese plugs can be used in the US but often not the other way around. The pins on Type A and Type B plugs have a hole near the tip that fits into ‘bumps’ found on the contact wipers of some sockets, so that the pins are gripped more tightly allowing for better contact and also to prevent the plug from slipping out of the socket. Some sockets have spring-action blades that grip the sides of the pins, making the holes obsolete.
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
The Type D electrical plug has three large round pins in a triangular pattern. Type M plugs are often used alongside Type D plugs for larger appliances and as a result, some sockets work with both Type D and Type M plugs. Type D plugs are rated 5 amps.
The Type G electrical plug has three rectangular blades in a triangular pattern and has an incorporated fuse (usually a 3 amps fuse for smaller appliances such as a computer and a 13 amps one for heavy duty appliances such as heaters). British sockets have shutters on the live and neutral contacts so that foreign objects can’t be introduced into them.
The Type J plug has two round pins as well as a grounding pin. Although the Type J plug looks a lot like the Brazilian Type N plug it is incompatible with the Type N socket as the earth pin is further away from the centre line than on Type N. However, Type C plugs are perfectly compatible with Type J sockets. Type J plugs are rated 10 amps.
The Type K plug has two round pins as well as a grounding pin. It is similar to Type F, the difference being that Type F has grounding clips instead of a grounding pin. Type C plugs are perfectly compatible with Type F sockets. Type E plugs and sockets are also used in Denmark.
There are two variations of the Type L plug, one rated at 10 amps, and one at 16 amps. The 10 amp version has two round pins that are 4 mm think and spaced 5.5 mm apart, with a grounding pin in the middle. The 16 amp version has two round pins that are 5 mm thick, spaced 8mm apart, as well as a grounding pin. Italy has a kind of “universal” socket that comprises a “schuko” socket for C, E, F and L plugs and a “bipasso” socket for L and C plugs.