Worldwide Homologation
Type Approval Specialists


Congo Democratic Republic

Radio Type Approval, Homologation, Certification Services - Global Market Access Solutions

We can offer you reliably all services concerning Type Approval in Congo Democratic Republic (Kinshasa). Our distinguished contact with the authority in Congo Democratic Republic (Kinshasa), our good relationship to Autorité de Régulation de la Poste et des Télécommunications du Congo (ARPTC), as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in Congo Democratic Republic trouble-free and cost-effective.

We will assist you to put your product successfully on the market by offering the following services:

  • Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
  • Provide pre-compliance testing during the design and development phase to determine compliance
  • Assist in completion of applications and other required forms
  • Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
  • Handle entire submittal process including working with local testing and certification organizations
  • Arrange for initial factory inspections that are required before certification issuance
  • Coordinate verification testing on qualified products as needed
  • Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
  • Support renewal maintenance of certificates as needed
  • User manual translation service when needed


For Congo Democratic Republic we can offer you a short termed tentative offer based upon a submitted Datasheet of the device:
quote@ib-lenhardt.de



GEO / MAP of Congo Democratic Republic


General information about Congo Democratic Republic

Formal Name
Congo Democratic Republic


Capital
Kinshasa


Continent


Degree of latitude
-4.769733375687573


Degree of longitude
23.5028232261718


Currency
Congolese franc


Country code
+ 243


Top-level domain
.cd


Languages
French


Size (in km²)
km²


Population (as of 2011)
0 Einwohner


Date of joining the UN
20.09.1960


Country code according to ISO 3166-2
CD


Country code according to ISO 3166-3
COD


Certificate Example for Congo Democratic Republic

Example Radio Type Approval Certificate for Congo Democratic Republic
Download Certificate
PDF / JPG



Mandatory / Voluntary
Mandatory

Authority / Regulatory Body
Autorité de Régulation de la Poste et des Télécommunications du Congo (ARPTC)

Validity Period of Certification
24 Month/s


Local Representative Required?
No

In-Country Testing Required?
No

Average lead time for radio type approval
7 weeks

Label Example for Congo Democratic Republic

Example Radio Type Approval Label for Congo Democratic Republic
Download Label
PDF / PNG



Marking of Certification Logo or Number Required?
Yes

Size
mm

Specific User Manual Requirements?
No

News for Congo Democratic Republic


  • New validity period for type approval certificate

    As previously released as an advanced notice on 26th of September 2019, the new regulation regarding the validity period of type approval certificates has come into force.

    L’Autorité de Régulation de la Poste et des Télécommunications du Congo (ARPTC) has recently published the decision 065/ARPTC/CLG/2019

    The approval of terminal equipment or radio installation is now granted for varying durations with equipment being classified into 6 categories

    1. Equipment connected to telecommunications networks and radio transmitters (Validity: 5 years)
    2. Landline and mobile phones. Low power equipment (Validity: 2 years)
    3. All other equipment different from the first two categories containing a radio module (Validity: 2 years)
    4. Receivers, reception decoders (Validity: 2 years)
    5. Antennas (Validity: 5 years)
    6. All other equipment not listed in categories 1-5 (Validity: 2 years)

    The renewal will be done under the same conditions.

     

    The new regulation also indicates marking rerquirements. The equipment must be labelled prior to marketing by the applicant, with an irremovable label including the following information:

    • Approval number and date

    • Identification of the model and batch or serial number

    • Manufacturer or supplier identification

    Source: original Décision 065/ARPTC/CLG/2019 in French


  • Certificates: New validity period

    Advance notice: New validity period for ARPTC certificates.
    Up to now, certificates' validity was set to 10 years.
    Based on an internal research, a new regulation will become in force in near future; namely:
    • Certificates for modules will have a validity of 2 years only.
    • Certificates for large equipment such as printers, computers, etc. will be issued for the validity period of 3 years.
    • And equipment connected to a public network will be approved for 5 years.
    Once IBL-AG will receive an official information from ARPTC, we will update you immediately. 
     
    Source: internal research


Product scope

Automotive

Radar
(24GHz, 77GHz, 79GHz, UWB)

Funkschlüssel
(315MHz, 433MHz, 868MHz)

Keyless Go
(125kHz, 13,56MHz)

Reifendrucksensoren
(125kHz, 315MHz, 433MHz, 868MHz)

Entertainment
(2,4GHz)

Industrie

Radar
(Tank Level, Positions-Radar)

Wireless-M-Bus
(315MHz, 433MHz, 868MHz)

Wireless-CAN-Bus
 

RFID
(125kHz, 13,56MHz, 868MHz)

UWB Devices
(24GHz, 60GHz, 79GHz)

Consumer Elektronik

WirelessHD
(60GHz)

WLAN
(2,4GHz, 3GHz, 5GHz, 10GHz)

Bluetooth
(2,4GHz)

Zigbee
(868MHz, 2,4GHz)

Safety Information for Congo Democratic Republic

Type C Plug
Type C Sock Type C Plug Type C Sock
Netzspannung
220V

Netzfrequenz
50Hz
Description
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
Type D Plug
Type D Sock Type D Plug Type D Sock
Netzspannung
220V

Netzfrequenz
50Hz
Description
The Type D electrical plug has three large round pins in a triangular pattern. Type M plugs are often used alongside Type D plugs for larger appliances and as a result, some sockets work with both Type D and Type M plugs. Type D plugs are rated 5 amps.
Type E Plug
Type E Sock Type E Plug Type E Sock
Netzspannung
220V

Netzfrequenz
50Hz
Description
The Type E electrical plug has two 4.8 mm round pins spaced 19 mm apart and a hole for the socket’s male grounding pin. The Type E socket is different to the Type F socket which is standard in other continental European countries, such as Germany. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type E plugs are rated 16 amps.

Alternate Country Names

  • DR Congo
  • Congo-Kinshasa
  • DRC
  • Kongo (Dem. Rep.)
  • Congo (Rép. dém.)
  • Kongo, Demokratska Republika
  • Congo (Rep. Dem.)
  • Демократическая Республика Конго
  • コンゴ民主共和国
  • Congo, the Democratic Republic of the
  • Kongo-Kinshasa
  • 콩고 민주 공화국

Contact

P. Müller
Type Approval Expert Congo Democratic Republic
Contact me now!
This website only uses the most necessary cookies to enhance your browsing experience. Please accept the use of cookies on this site, to allow us improving the site for you. You will find more information about cookies in the Privacy Statement